Lorraine Marshall, President of TL Marshall CO
Welcome to Foam Cutting World
800-856-1009 FoamCuttingWorld@aol.com
Bendable Hot Wire Tools & Tables
Foam Cutting World Gift Certificates - Click Here
Bendable Hot Wire Descriptions
* Light Duty Free Hand Router - $108.90 Click Here
Make the Blade Into Any Shape!! Comes with 5 ultra-stiff, yet shapable 10.5" wires that bolt onto the arms. Scoop out big or tiny pieces of foam for any level of control. Comes with the Pro Power Station. This adjustable temperature power station allows you to set the optimal cutting speed for all of our Craft and Pro Tools for more creative sculpting. Has a convenient resetable safety fuse.
* Light Duty Free Hand Router with Sled Guide - $129.95 Click Here
Handy sled guide accessory with swivel action for various angles. Helps with Smooth, Precision Cuts
* The Original Hot Knife with Flat Wire Adaptor Only, $199.00
Deluxe Hot Knife 
Transformer-powered, heats up in seconds. Only 1 lbs with high quality Flat Wire Adaptor Kit, which allows you to bend one foot of flat wire to any shape needed. Full range of blades available with this knife at extra charge. Post mounts (not stamped) to easy exchange of additional blades. Cuts EPS and Extruded Foam. Comes with a spring loaded safety Trigger. High powered, 105 watts right in the handle. This is limited-time-use tool. Use for 5 minutes and then cool for 2-1/2 minutes. To avoid overheating and damaging the tool, depress the trigger for 15 seconds, then release the trigger for 15 seconds. Using the tool longer than 5 minutes at a time will cause heat damage and is not covered by the warranty. Do not use a screwdriver to tighten the blade screws. Finger-tighten only!
* Hot Knife SET w/Flat Wire Adaptor, 4.5" Straight Blade & 0.75" Curved Blade, $285.00
Same Set as above but with two additional blades & Flat Wire Adaptor kit for a wide variety of jobs. Click Here
* Set of TWO Hot Knives: Original Hot Knife with Flat Wire Adaptor & the PRO-1 Hot Knife, $290.00
Same Original Hot Knife with Flat Wire Adaptor Plus Our Most Popular Straight Cutter. Perfect when
The Original Hot Knife is limited-time-use tool. To avoid overheating and damaging the tool, use for
five minutes on and then rest for three minutes. Once heated to the proper cutting temperature, depress
the trigger for 15 seconds, then release the trigger for 15 seconds. Continue this cycle for a maximum of
5 minutes. Then let the tool rest for 2-1/2 minutes. Using the tool longer than 5 minutes at a time will cause
heat damage and is not covered by the warranty. Do not use a screwdriver to tighten the blade screws.
Finger-tighten only!
The PRO-1 Hot Knife has a duty cycle for 15 minutes prior to needing a 3 minute rest.
* Flat Wire & Shaping Tool............BUY NOW
KITWCP10 - Ten Feet of Heavy Gauge Shapeable FLAT Wire and Wire Shaping Tool
for use with the APC Power Controller or Hot Knife with Flat Wire Adaptor $105.00
KITWCP10 - Ten Feet of Heavy Gauge Shapeable FLAT Wire and Wire Shaping Tool
for use with the APC Power Controller or Hot Knife with Flat Wire Adaptor $105.00
3D Scroll Table with Bendable Hot Wire $299.00
Combination Scroll Table, Router, and Lathe. Comes with a combination of 7 wires and blades (include low gauge,
high gauge and flat wire/Ribbon blade), stationary and travelling fences, vertical lathe, milling attachments, and more.
Big sturdy 16x18" ABS base offers a 12" high arm. Lower the arm and bend the blades to specific shapes. Unlimited
horizontal cut. Includes Pro Power Station for necessary power requirements. This table mimics features offered on
larger hot wire industrial tables for the hobby foam workers.
Hot Wire Kit for High Gauge, BENDABLE Wire - $1228.00 Buy Now
This unique kit includes a very High Powered, Auxiliary Power Controller that heats up to three feet of Bendable Flatwire
(0.28 gauge) or Round NiChrome Wire (.125 gauge) for cutting EPS foam shapes. Flat Wire is standard with this order but
you may specifiy Round Wire. This wire will hold specialized shapes. Includes 10 feet of Flat or Round Wire, 2 insulators,
and one spring and a Wire Shaping Tool.
Aesthetic Groove Cutter and Sled Guide with or without case and 10' Nichrome flat wire
Groover Gun and Sled Alone - $525.00 Buy Now
Groover Gun, Sled and 10' Flat Wire & Carry Case - $642.00 Buy Now
Groover Weighs only 4 lbs Handles up to 5" x 3" of NiChrome Flat Wire Heats up Fast Cuts clean with one pass Available in 220 for additional charge
Combination Scroll Table, Router, and Lathe. Comes with a combination of 7 wires and blades (include low gauge,
This unique kit includes a very High Powered, Auxiliary Power Controller that heats up to three feet of Bendable Flatwire
(0.28 gauge) or Round NiChrome Wire (.125 gauge) for cutting EPS foam shapes. Flat Wire is standard with this order but
